Nobody knows paint like Crowies! Our team members have many years' collective experience and love sharing their wisdom with customers.
That's why it's always worth keeping across our Hints & Tips. Think of it as your painting knowledge centre. It's the place where we post great ideas and top tricks about all things paint – and if you can't find what you're looking for here, give us a shout – we're always happy to help!
Wattyl Interior Design i.d Advanced is the latest innovation in architectural coatings.Read More
The concrete floor in this showroom has been ground and painted with the extremely hard wearing Wattyl Epinamel DTS680 in N65 Graphite Grey.Read More
Roller sleeves can hold a large amount of paint. Scrape the excess paint from the roller sleeve using a circular roller scraping tool before you wash it. This will save paint and make it much easier to clean.
After you’ve cut in the edges at the ceiling and skirting boards, apply the paint using a roller from the ceiling downward. Any drips or runs that occur will be painted over as you move down the wall. Once the paint has been spread out, always “lay off” from top to bottom to avoid lap marks and thick edges. Don’t press too hard, rather allow the weight of the roller to even out the paint.
If you are waiting for the first coat to dry, wrap your brush and roller in glad wrap to prevent it from drying out. If you have finished for the day, wrap your brush and roller in glad wrap, place in a plastic bag and store in the fridge overnight.
Colour, texture or gloss variations between brushed and rolled areas is a paint application defect known as "Picture Framing". When rolling up to the cutting in at a cornice, turn the roller frame and run it parallel to the cornice with the open end closest to the ceiling, rolling as closely as practicable to the cornice. This will eliminate the texture difference between the brushed and rolled area which can appear as a colour or gloss difference.
Finish one wall before starting another. This allows the brushed and rolled areas to blend together. All cans of paint are slightly different colours. Never use a different can of paint to cut in and another to roll the walls. Never change paint cans halfway through a wall.
When rolling walls, use an extension pole attached to the roller handle so that you can apply the paint to the full height of the wall in a single stroke. This will eliminate the need to constantly climb up and down ladders and will enable you to maintain a “wet edge”, eliminating lap marks.
Wash roller sleeves before their first use to remove any loose fibres that would inevitably come off into the paint, leaving a rough, unsightly finish. Wash the sleeves with water, running your hands up and down to remove the loose fibres. Spin out the excess water before painting.
Painting a compressed straw ceiling can be achieved using conventional paints provided a few simple application techniques are followed.Read More