Nobody knows paint like Crowies! Our team members have many years' collective experience and love sharing their wisdom with customers.
That's why it's always worth keeping across our Hints & Tips. Think of it as your painting knowledge centre. It's the place where we post great ideas and top tricks about all things paint – and if you can't find what you're looking for here, give us a shout – we're always happy to help!
Painting the top and bottom edges of exterior doors and doors in wet areas will prevent moisture and condensation from being absorbed into the timber through the exposed end grain. This will significantly extend the paint coating and protect the timber door from swelling and the need to replace it.
Avoid painting in direct sunlight, especially during summer as the heat in the surface being painted and the sun itself will cause the paint to dry too quickly, resulting in unsightly brush marks and brushes becoming clogged. Always start in the shade and work around the house so that you remain in the shade. Adding a wet edge extender to the paint will assist with paint workability.
Colour, texture or gloss variations between brushed and rolled areas is a paint application defect known as "Picture Framing". When rolling up to the cutting in at a cornice, turn the roller frame and run it parallel to the cornice with the open end closest to the ceiling, rolling as closely as practicable to the cornice. This will eliminate the texture difference between the brushed and rolled area which can appear as a colour or gloss difference.
“Cutting In” around cornices, architraves and skirting boards takes practice. A long handled cutter brush provides better control than a wall brush. Load the brush and start brushing several centimetres away from the cut-in edge. As the brush unloads, work the brush up to the cutting in line and slowly drag the brush along. You may need to do this several times to achieve coverage. This technique will prevent too much paint being applied in the corners or along the trim that will invariably run.
Finish one wall before starting another. This allows the brushed and rolled areas to blend together. All cans of paint are slightly different colours. Never use a different can of paint to cut in and another to roll the walls. Never change paint cans halfway through a wall.
To achieve an extremely smooth professional finish free of brush marks on trim work, mix a wet edge extender such as Penetrol, Floetrol or Hot Weather Thinners into the paint. This will slow down the drying giving you longer working time to overlap painted areas and allow the paint to “level out” so that brush marks are virtually eliminated.
When rolling walls, use an extension pole attached to the roller handle so that you can apply the paint to the full height of the wall in a single stroke. This will eliminate the need to constantly climb up and down ladders and will enable you to maintain a “wet edge”, eliminating lap marks.
When loading a paint brush, only immerse the bristles to half their length into the paint then tap the brush against the top edge of the can to remove the excess paint rather than wiping the brush on the can lip.
Don’t allow brushes to soak in water, thinners or paint for extended periods of time as the brush will swell and lose its shape. The bristles will absorb the liquid which can then drip out of the ferrule (the metal strip that holds the bristles in place) when they are used.
Always mix your paint before you use it with a paint wacker or broad paint stirring stick using a circular, upward motion. A screwdriver or piece of dowel will not mix the paint sufficiently and may result in unsightly colour, coverage and gloss variations in the dried finish.